Back to Tag Table Index | Back to 007 Index
| Heading | Position in Field | Length | Codes | Physical Description Fixed Field (007) (Repeatable) Valid When 007 TYP = s Headings and codes used in 007 fixed field data element depend on the GMD value. |
| 007 GMD | 0 | 1 | CATEGORY OF MATERIAL (General Material Designation) | |
| *s | Sound recording |
| Heading | Position in Field | Length | Codes | Physical Description Fixed Field (007) (Repeatable) Valid When 007 TYP = s Headings and codes used in 007 fixed field data element depend on the GMD value. |
| SMD | 1 | 1 | SPECIFIC MATERIAL DESIGNATION | |
| d | Sound disc | |||
| e | Cylinder | |||
| g | Sound cartridge | |||
| i | Sound-track film | |||
| q | Roll | |||
| s | Sound cassette | |||
| t | Sound tape reel | |||
| w | Wire recording | |||
| z | Other sound medium type | |||
| *? | Data not yet supplied (fill character) |
| Heading | Position in Field | Length | Codes | Physical Description Fixed Field (007) (Repeatable) Valid When 007 TYP = s Headings and codes used in 007 fixed field data element depend on the GMD value. |
| O/R | 2 | 1 | ORIGINAL VERSUS REPRODUCTION ASPECT | |
| f | Facsimile | |||
| o | Original | |||
| r | Reproduction | |||
| u | Unknown | |||
| *? | Data not yet supplied (fill character) | |||
| Note: Use of values other than "?" is not recommended (see USMARC Format for Bibliographic Data.) |
| Heading | Position in Field | Length | Codes | Physical Description Fixed Field (007) (Repeatable) Valid When 007 TYP = s Headings and codes used in 007 fixed field data element depend on the GMD value. |
| SP | 3 | 1 | SPEED | |
| a | Disc - 16 rpm | |||
| b | Disc - 33 1/3 rpm | |||
| c | Disc - 45 rpm | |||
| d | Disc - 78 rpm | |||
| e | Disc - 8 rpm | |||
| f | Disc - 1.4 m. per sec. | |||
| h | Cylinder - 120 rpm | |||
| i | Cylinder - 160 rpm | |||
| k | Tape - 15/16 inches per second | |||
| l | Tape - 1 7/8 ips | |||
| m | Tape - 3 3/4 ips | |||
| o | Tape - 7 1/2 ips | |||
| p | Tape - 15 ips | |||
| r | Tape - 30 ips | |||
| u | Unknown | |||
| z | Other speed | |||
| *? | Data not yet supplied (fill character) |
| Heading | Position in Field | Length | Codes | Physical Description Fixed Field (007) (Repeatable) Valid When 007 TYP = s Headings and codes used in 007 fixed field data element depend on the GMD value. |
| SND | 4 | 1 | CONFIGURATION OF PLAYBACK CHANNELS | |
| m | Monaural | |||
| q | Quadraphonic | |||
| s | Stereophonic | |||
| u | Unknown | |||
| z | Other configuration of playback channels | |||
| *? | Data not yet supplied (fill character) |
| Heading | Position in Field | Length | Codes | Physical Description Fixed Field (007) (Repeatable) Valid When 007 TYP = s Headings and codes used in 007 fixed field data element depend on the GMD value. |
| GRV | 5 | 1 |
GROOVE WIDTH/GROOVE PITCH | |
| n | Not applicable | |||
| m | Microgroove/fine | |||
| s | Coarse/standard | |||
| u | Unknown | |||
| z | Other groove width/groove pitch | |||
| *? | Data not yet supplied (fill character) |
| Heading | Position in Field | Length | Codes | Physical Description Fixed Field (007) (Repeatable) Valid When 007 TYP = s Headings and codes used in 007 fixed field data element depend on the GMD value. |
| DIM | 6 | 1 | DIMENSIONS | |
| n | Not applicable | |||
| a | Open reel or disc - 3 inches | |||
| b | Open reel or disc - 5 inches | |||
| c | Open reel or disc - 7 inches | |||
| d | Open reel or disc - 10 inches | |||
| e | Open reel or disc - 12 inches | |||
| f | Open reel or disc - 16 inches | |||
| g | Open reel or disc - 4 3/4 in. (12 cm.) | |||
| j | Cassette - 3 7/8 x 2 1/2 inches | |||
| o | Cartridge - 5 1/4 x 3 7/8 inches | |||
| s | Cylinder - 2 3/4 x 4 inches | |||
| u | Unknown | |||
| z | Other dimensions | |||
| *? | Data not yet supplied (fill character) |
| Heading | Position in Field | Length | Codes | Physical Description Fixed Field (007) (Repeatable) Valid When 007 TYP = s Headings and codes used in 007 fixed field data element depend on the GMD value. |
| WID | 7 | 1 | TAPE WIDTH | |
| l | 1/8 inch | |||
| m | 1/4 inch | |||
| n | Not applicable | |||
| o | 1/2 inch | |||
| p | 1 inch | |||
| u | Unknown | |||
| z | Other | |||
| *? | Data not yet supplied (fill character) |
| Heading | Position in Field | Length | Codes | Physical Description Fixed Field (007) (Repeatable) Valid When 007 TYP = s Headings and codes used in 007 fixed field data element depend on the GMD value. |
| TAPE | 8 | 1 | TAPE CONFIGURATION | |
| n | Not applicable | |||
| a | Full (1) track | |||
| b | Half (2) track | |||
| c | Quarter (4) track | |||
| d | Eight track | |||
| e | Twelve track | |||
| f | Sixteen track | |||
| u | Unknown | |||
| z | Other tape configuration | |||
| *? | Data not yet supplied (fill character) |
| Heading | Position in Field | Length | Codes | Physical Description Fixed Field (007) (Repeatable) Valid When 007 TYP = s Headings and codes used in 007 fixed field data element depend on the GMD value. |
| TYPE | 9 | 1 | KIND OF DISC, CYLINDER, OR TAPE | |
| a | Master tape | |||
| b | Tape duplication master | |||
| d | Disc master (negative) | |||
| n | Not applicable | |||
| i | Instantaneous (recorded on the spot) | |||
| m | Mass-produced | |||
| r | Mother (positive) | |||
| s | Stamper (negative) | |||
| t | Test pressing | |||
| u | Unknown | |||
| z | Other | |||
| *? | Data not yet supplied (fill character) |
| Heading | Position in Field | Length | Codes | Physical Description Fixed Field (007) (Repeatable) Valid When 007 TYP = s Headings and codes used in 007 fixed field data element depend on the GMD value. |
| MAT | 10 | 1 | KIND OF MATERIAL | |
| n | Not applicable | |||
| a | Lacquered | |||
| l | Metal | |||
| m | Metal and plastic | |||
| p | Plastic | |||
| s | Shellac | |||
| w | Wax | |||
| u | Unknown | |||
| *? | Data not yet supplied (fill character) |
| Heading | Position in Field | Length | Codes | Physical Description Fixed Field (007) (Repeatable) Valid When 007 TYP = s Headings and codes used in 007 fixed field data element depend on the GMD value. |
| CUT | 11 | 1 | KIND OF CUTTING | |
| n | Not applicable | |||
| h | Hill-and-dale cutting | |||
| l | Lateral or combined cutting | |||
| u | Unknown | |||
| *? | Data not yet supplied (fill character) |
| Heading | Position in Field | Length | Codes | Physical Description Fixed Field (007) (Repeatable) Valid When 007 TYP = s Headings and codes used in 007 fixed field data element depend on the GMD value. |
| R/CH | 12 | 1 | SPECIAL PLAYBACK CHARACTERISTICS | |
| n | Not applicable | |||
| a | NAB standard | |||
| b | CCIR standard | |||
| c | Dolby-B encoded | |||
| d | dbx encoded | |||
| e | Digital recording | |||
| f | Dolby-A encoded | |||
| g | Dolby-C encoded | |||
| h | CX encoded | |||
| u | Unknown | |||
| z | Other special playback characteristics | |||
| *? | Data not yet supplied (fill character) |
| Heading | Position in Field | Length | Codes | Physical Description Fixed Field (007) (Repeatable) Valid When 007 TYP = s Headings and codes used in 007 fixed field data element depend on the GMD value. |
| C/ST | 13 | 1 | CAPTURE AND STORAGE TECHNIQUE | |
| a | Acoustical capture, direct storage | |||
| b | Direct storage, not acoustical | |||
| d | Digital storage | |||
| e | Analog electrical storage | |||
| u | Unknown | |||
| z | Other capture and storage technique | |||
| *? | Data not yet supplied (fill character) |
Back to Tag Table Index | Back to 007 Index